Chapter 5: Changing System Settings
7.
Set the Layer 2 hash mode for all ports. The hash mode controls the distribution of
flow entries in Layer-2 and Layer-3 lookup tables. Assuming a MAC address of the
value 0011:2233:4455, the following list describes the various hash modes.
–
M0 – 0011:2233:4455
–
M1 – 0011:2233:5544
–
M2 – 0011:3322:4455 (default hash mode)
–
M3 – 1100:2233:4455
Note:
8.
Click OK.
Configuring an Individual Port
Configure an individual port if you want to enable or disable that port or set the port's
physical characteristics. To configure an individual port:
1.
Start Configuration Expert if you have not already done so.
Note:
2.
Open the configuration file you want to modify and then double-click that file's
System Configuration object.
3.
Double-click the Chassis Configuration object.
A list of modules similar to the following appears.
.
54
Cabletron has configured the SSR's hash mode to its optimal setting. It is
recommended you not change the hash mode unless advised to do so by
Cabletron Technical Support.
If you open Configuration Expert by clicking a port in the Front Panel view,
Configuration Expert assumes you want to modify that port in the Active
Configuration file and automatically opens that port's dialog box. If you are
modifying that port in the Active Configuration file, go to
Figure 17. Sample list of modules
step
6.
CoreWatch User's Manual