Table of Contents
Advertisement
Cabletron has configured the SSR's hash mode to its optimal setting. It is
recommended you not change the hash mode unless advised to do so by
Cabletron Technical Support.
You can configure global settings for all SSR ports as well as configure individual ports. If
most of an SSR's ports are to be configured with the same or similar settings, you can first
apply global settings to all ports and then modify those settings on individual ports as
needed. Separate discussions on configuring default settings for all ports and configuring
an individual port follow.
To configure global settings on all of the SSR's ports:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
System Configuration object.
3.
Double-click the Chassis Configuration object.
4.
Click the Global Port Parameters object.
A Global Attributes of Ports dialog box similar to the following appears:
5.
If you want all Gigabit Ethernet ports to detect and then use the operating mode and
speed of the network segment to which those ports are connected, select the Auto
Advertisement
Table of Contents
