Honda Accord 2008 Manual page 2256

07/11/02 09:37:04 61TA0000_220_0226
MICU Input Test
NOTE:
• Before testing, troubleshoot the multiplex integrated control unit first, using B-CAN System Diagnosis Test Mode A
(see page 22-120).
• Before testing, make sure the No. 5 (7.5 A) fuse in the driver's under-dash fuse/relay box is OK.
Driver's MICU
1. Turn the ignition switch to LOCK (0), and remove the driver's dashboard lower cover (see page 20-152).
2. Disconnect driver's under-dash fuse/relay box connectors D, F, N, P, Q, and R.
NOTE: All connector views are wire side of female terminals.
＊０１
BLU
3. Inspect the connector and socket terminals to be sure they are all making good contact.
• If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
• If the terminals look OK, go to step 4.
ＴＡ０８Ａ００Ｊ３２１７３６４１９５３ＦＣＡＴ００
CONNECTOR D (16P)
GRN
BLU
CONNECTOR F (33P)
WHT
WHT
CONNECTOR N (16P)
WHT
CONNECTOR P (20P)
GRN
BLU
CONNECTOR Q (20P)
BRN
GRN
CONNECTOR R (24P)
BRN BLK
LT GRN BRN
(cont'd)
22-223