Honda Accord 2008 Manual page 2251

07/11/02 09:37:01 61TA0000_220_0221
Exterior Lights
High Mount Brake Light
Replacement
1. Open the trunk lid.
2. Disconnect the 2P connector (A) from the high
mount brake light.
High Mount Brake Light: 21 W
＊０１
3. Turn the bulb socket (B) 45 ° counterclockwise to
remove the bulb (C).
4. Remove the rear shelf (see page 20-119).
5. Remove the high mount brake light (A).
＊０２
6. Install the light in the reverse order of removal.
22-218 22-218
ＴＡ０８Ａ００Ｊ３２１１３３３１６０１ＫＢＡＴ０１
C
B
A
A
Brake Pedal Position Switch Test
1. Disconnect the 4P connector (A) from the brake
pedal position switch (B).
2. Check for continuity between the No. 1 and No. 2
terminals.
• There should be continuity when the brake pedal
is pressed.
• There should be no continuity when the brake
pedal is released.
3. Check for continuity between the No. 3 and No. 4
terminals.
• There should be no continuity when the brake
pedal is pressed.
• There should be continuity when the brake pedal
is released.
4. If necessary, adjust or replace the switch, or adjust
the pedal height (see page 19-6).
ＴＡ０８Ａ００Ｊ３２１１３３１４８０５ＦＥＡＴ００
B
A
＊０１