Table of Contents
Advertisement
U l t i m a S V
UPGRADING PANELVIEW 1000 SOFTWARE
1.
Turn power to the touchscreen Off.
2.
Insert the flashcard and adapter into the memory card slot
located in the back of the touchscreen.
3.
Turn power to the touchscreen On.
4.
Touch the square prompt that appears in the lower right
corner of the touchscreen.
5.
Verify Memory Card option is selected at the configura-
tion mode screen, then touch ← (enter).
The ↑ ↓ (up/down arrows) move the cursor for highlighting/selecting.
6.
Verify the application is displayed on the Applications on
Card screen.
7.
If more than one PVA file exists on the card, touch Mem-
ory Card Listing until the correct application displays on
the Applications on Card screen.
8.
Touch Restore From Card.
A warning will display.
9.
Touch Continue.
A power bar displays the progress of the download in the File Trans-
fer Status screen. The screen will automatically reboot and display the
powerup screen when the download is complete.
10.
Turn power to the touchscreen Off.
11.
Remove the flashcard and adapter from the memory card
slot.
12.
Turn power to the touchscreen On.
H A Y S S E
NSA N D I AC R E
®
5
5 - 5 3 / R e v 1 5
Hide quick links:
Advertisement
Table of Contents
