11
8.Set the Front Drive Link Assembly angle position using the
Drive Link Angle Fixture.
(1) Fixture Required
1
2
1 = Front Drive Link Assembly
2 = Drive Link Angle Fixture (1 required)
Figure 27: Servo Jaw Drive Link Angle Fixture Setup
a.
Manually close the jaws to place the drive linkage in
the horizontal position.
b.
Use the Horizontal Lock Position Fixture to lock the
drive linkage in position.
1
2
3
1 = Top Half
2 = Bottom Half
3 = Hex Nut
Figure 28: Horizontal Lock Position Fixture
H A Y S S E
NSA N D I AC R E
®
U l t i m a S V
1 1 - 4 7 / R e v 1 5