Table of Contents
Advertisement
Product Stripper (Cam Operated)
1 4 - 4 0 / R e v 1 5
1.
Turn the strippers On from the touch screen
Enter 358 for the TO setting
•
The strippers open at the end of the bag making
•
cycle
2.
Completely open the external flow controls and internal
cushions (counterclockwise).
3.
Verify the main pressure regulator is set to 65 PSI.
C
:
AUTION
Exceeding 65 PSI (4.5 bar) damages the machine.
4.
Load the fastest empty bag program stored in the machine.
The machine must be timed in the fastest cycle to operate correctly at
slower speeds. Time the jaws to open at 350 .
5.
Cycle the machine and observe the stripper bars. If they
contact the white cams on the way open:
a. turn the power Off and lockout the machine
b. remove the left side guard and move the bottom of the
proximity switch 1/8" (3 mm) toward the front of the
machine
c. restore power and cycle the machine again, observing
the stripper bars
d. continue to repeat this cycle until the stripper bars
open freely without hitting the white cams
I
:
MPORTANT
If the proximity switch is set too far toward the rear of the
machine, damage to the stripper bars and jaw assembly may
occur. If the proximity switch is set too far toward the front of the
machine, bags catch on the stripper bars.
H A Y S S E
NSA N D I AC R E
®
U l t i m a S V
Hide quick links:
Advertisement
Table of Contents
