HayssenSandiacre Ultima SV 12-19HR Instruction Manual page 69

K
NIFE
S
TRIPPER
S
EALER
M R
EASURING OLLER
P C
ULL OMPLETE
Z M
IPPER OVE
C
OMPLETE
Z 2 P
IPPER ND ULL
C
OMPLETE
S C
INGLE YCLE
C C
ONTINUOUS YCLE
E Z
NABLE IPPER
E Z L
NABLE IPPER IMIT
S
WITCH
J Z
OG IPPER
Z U
IPPER NWIND
F
ORWARD
U l t i m a S V
A start value (FROM) is entered in the From Deg field. This function
cuts the zipper material in preparation for the sealer to seal the zipper
to the film. The Made Deg is a display of the degree when the action is
completed.
Enables or disables the zipper stripper function.
A start value (FROM) is entered in the From Deg field. This function
seals the zipper material to the film. The Made Deg is a display of the
degree when the action is completed.
Displays the machine cycle degree when the registration roller stops
pulling film.
Displays the degree when the zipper stops pulling zipper material dur-
ing the first cycle.
Displays the degree when the zipper stops pulling zipper material dur-
ing the second cycle.
Sets the machine in single bag mode.
Sets the machine in continuous cycle mode.
Enables or disables the zipper tape application function.
Enables or disables the zipper tape level warning feature.
Used to manually control the flow of zipper material.
Used to manually advance the zipper material forward through the
packaging machine.
H A Y S S E NSA N D I AC R E ®
5
5 - 2 7 / R e v 1 5