Double Dumping - HayssenSandiacre Ultima SV 12-19HR Instruction Manual

Mechanical
Interface

Double Dumping

U l t i m a S V
The usual mechanical interface is a transition chute between the end of
the feed system discharge and the entrance to the forming tube assem-
bly funnel.
1. Poker
A. Width of Poker
Access Hole
Double dumping to achieve larger weights is not recommended in
most cases. However, machines with a volumetric feed system can
have double dumps. The feed system should give a signal on each
dump.
H A Y S S E NSA N D I AC R E
2. Product Shield
B. Height of
Poker Access
Hole
Figure 2: Transition Chute
®
3
C. Diameter of
Transition Chute
3 - 7 / R e v 1 5