HayssenSandiacre Ultima SV 12-19HR Instruction Manual page 60

Allen Bradley PanelView 1000 Screens
AUGER
Use this screen to view auger settings and access the Auger Calibration screen.
T W
ARGET EIGHT
A W
CTUAL EIGHT
T S
URNS ET
I T
NCREMENT URNS
D T
ECREMENT URNS
T C
OTAL YCLES
A O
GITATOR FF
D
ELAY
5 - 1 8 / R e v 1 5
Enter the actual needed weight for the final filled bag.
Displays the actual weight distributed.
Displays the number of turns the auger will make in one machine
cycle.
Holding the pad for one second will invoke a ramp function that will
increase the Turns Set amount by 0.1.
Holding the pad for one second will invoke a ramp function that will
decrease the Turns Set amount by 0.1.
Shows the total number of cycles the auger has completed since the last
time the reset button was pushed.
Sets the number of seconds before the agitator stops after filling a bag.
With Fill toggles between On and Off. With Fill on means the
agitator is on during a fill and stays on after the fill is complete
as specified by the Off Delay. On means the agitator is always
on. Off means the agitator is always off.
H A Y S S E
p
NSA N D I AC R E ®
U l t i m a S V