HayssenSandiacre Ultima SV 12-19HR Instruction Manual page 241

CHAPTER 14: OPTIONS
Accu-Track Enable
U l t i m a S V
I :
MPORTANT
DISCLAIMER: This chapter contains information on various
•
accessories that may be used with certain applications. All
options are not available for all machine models and with
some machine sizes. Please contact HayssenSandiacre Engi-
neering with questions concerning the availability of options.
Options must be activated/deactivated via the System Installa-
•
tion screen in order for them to function.
ACCU-TRACK FILM TRACKING SYSTEM
Accu-Track monitors the edge of the film and sends signals to the con-
troller which signals the motor. The motor moves the unwind left or
right to maintain correct film position at the forming shoulder.
Film Registration Scanner Control Unit
Lateral Adj. Handwheel Anti-Flutter
Film Backup
Eyespot Locating
Arrow
Eyespot Sensor
Angle Adj.
Eyespot Sensor
Front/Rear Adj.
Accu-Track Eye Amplifier
Accu-Track is enabled or disabled on the System Installation screen for
PanelView controls and on the Program Setup screen for CTC controls.
When Accu-Track is enabled and in automatic mode, the left or right
touchpad illuminates on the controller to indicate the direction of the
film and unwind.
H A Y S S E N
Accu-Track Eye
Ski
Accu-Track Location
Accu-Track
Eye Sensor
Bracket
Sensitivity Adj.
Figure 1: Accu-Track
SA N D I AC R E ®
14
Accu-Track Eye
Lateral Adj. Knob
Switch
Status LEDs
1 4 - 1 / R e v 1 5