HayssenSandiacre Ultima SV 12-19HR Instruction Manual page 225

U l t i m a S V
3.Remove the bag eject assembly from the machine.
1
Figure 36: Bag Eject Mounting
a. Remove two (2) air hoses from the bag eject assembly.
b. Support the bag eject assembly from underneath using
a suitable lift jack.
c. Remove four (4) bag eject mounting bolts from under-
neath the servo drive assembly.
d. Lower the bag eject assembly and remove it from the
machine.
4.Remove the servo drive guard from the assembly.
1
1 = Mounting Bolts
Figure 37: Servo Drive Assembly Guard
a. Remove four (4) guard mounting bolts.
b. Slide the guard off of the sevo drive assembly and out
of the machine area.
H A Y S S E NSA N D I AC R E
1 = Mounting Bolts
®
11
1 1 - 5 7 / R e v 1 5