HayssenSandiacre Ultima SV 12-19HR Instruction Manual page 59

OPTIONS 2
Use this screen to set up and view parameters for installed options.
P 1 2
RINTER OR
H P
OLE UNCH
B S
AG PACER
B E H
AG JECT EIGHT
U l t i m a S V
mmmmmp
A printer is normally turned on when the film is stopped and remains
on for a duration required by the printer. The FROM and TO values are
adjusted to suit the application.
Enter a FROM and TO value between 0° and 359°
This function allows the operator to set a space between the bags at the
beginning of a new carton.
Total Number refers to the total number of bag for the carton.
Gap is the number of bags held by the spacer to form a gap on
the discharge conveyor.
Use the Increase or Decrease touchpads to adjust the height of the bag
eject.
H A Y S S E NSA N D I AC R E
T S
YPICAL ETTING
FROM 150° TO 250°
®
5
5 - 1 7 / R e v 1 5