Table of Contents
Advertisement
Registration Roller Assembly Components
Cleaning
Lubrication
Adjustments
7 - 2 / R e v 1 5
It is extremely important for proper operation of the machine that the
measuring roller and upper feed roller assembly be clean and free of
dirt and contamination. The rollers should be cleaned frequently with
soap and water. Any worn rollers should be replaced.
No lubrication is required.
1.
Tighten the drive pulley belt to allow approximately 3/8"
deflection.
2.
There are three pressure nuts in the upper support plate.
Adjust the outside nuts so the distance from the plate to
the top of the nut is 5/8".
3.
The inside nut should be locked down tightly to the plate.
H A Y S S E
NSA N D I AC R E
®
U l t i m a S V
Hide quick links:
Advertisement
Table of Contents
