Table of Contents
Advertisement
U l t i m a S V
CANTILEVER PRESSURE ROLLER ADJUSTMENT
When pressure rollers are repositioned or replaced, the pressure must
be reset. All springs must be adjusted to the same setting.
I
:
MPORTANT
This is a factory setting. Minor adjustments may need to be made
to the distance setting depending on film.
Top Mounted
Adjusting Nut
Bottom Mounted
1.
Turn the adjusting nut until a distance of 1-5/16" is
obtained as shown in the above photo.
2.
Tighten the lock nut.
3.
Re-measure to ensure the correct distance is maintained.
H A Y S S E
NSA N D I AC R E
1-5/16"
Lock Nut
®
7
7 - 3 / R e v 1 5
Hide quick links:
Advertisement
Table of Contents
