Table of Contents
Advertisement
Pressure Roller
Adjustment
Cleaning
Lubrication
Miscellaneous
Adjustments
U l t i m a S V
USDA REGISTRATION ROLLERS
Figure 6: USDA Registration Rollers
MAINTENANCE
When loading film or performing maintenance on the registration roll-
ers, it may be necessary to release the pressure roller.
1.
Turn the valve control to the far right to close the pressure
roller.
2.
Turn the valve control to the far left to open the pressure
roller.
3.
The pressure belts can be rolled from groove to groove on
the pressure roller to clean or adjust for film width.
It is extremely important for proper operation of the bagmaking
machine that the registration roller and upper feed roller assembly be
clean and free of dirt and contamination. Clean the rollers frequently
with soap and water. Install new rollers when wear is evident.
No lubrication is required.
1.
Tighten the drive pulley belt to allow approximately 3/8"
deflection.
2.
There are three pressure nuts in the upper support plate.
a. back out the two outside nuts so the dimension from
the plate to the top of the nuts is 5/8".
b. lock the inside nut down tightly to the plate.
H A Y S S E
NSA N D I AC R E
®
7
7 - 7 / R e v 1 5
Hide quick links:
Advertisement
Table of Contents
