HayssenSandiacre Ultima SV 12-19HR Instruction Manual page 247

U l t i m a S V
3. Slide the spring loader finger assembly into place.
4. Tighten the two bolts.
5. Restore power and air to the machine.
6. Cycle the machine to verify the adjustment is correct.
7. Repeat steps 1-4 if necessary.
SMALL BAG SQUEEZER
The small bag squeezer forces air out of the package and flattens it
prior to sealing the top of the package.The removal of excess air from
the bag allows for better shipping and a prolonged shelf-life for the
product. The bag squeezer shown below is used with the fixed rotated
jaw assembly.
Adjustment Handle
Figure 8: Small Bag Squeezer Plates and Adjustment Handle
The squeezer plates should be positioned to the minimum opening that
allows the filled bag to pass through between the plates with no contact
with the plates. The plates can be positioned relative to the centerline
of the machine by rotating the adjustment handle.
BAG SQUEEZER
The bag squeezer removes air from the package to produce a thinner
bag. The removal of excess air from the bag allows for better shipping
and a prolonged shelf-life for the product.
H A Y S S E NSA N D I AC R E
Pneumatically actuated
squeezer plates
®
14
1 4 - 7 / R e v 1 5