Inline Zipper
Platen
U l t i m a S V
Figure 3: Inline Zipper Platen
The inline zipper platen appears on machines with the inline zipper
applicator and follows the same principle of operation as the double
platen fin seal assembly; however, the front platen has two sealing sur-
faces that seal the zipper, and the rear platen creates the back seal.
C
P
HANGING THE
LATEN
For removable platens, follow the procedure below to change between
the zipper platen and the regular platen.
1.
Remove power and air from the machine.
2.
Disconnect the electrical quick disconnect.
3.
Remove the two airlines connected to the platen.
H A Y S S E
NSA N D I AC R E
Figure 4: Pivot Pin
®
10
1 0 - 5 / R e v 1 5