HayssenSandiacre Ultima SV 12-19HR Instruction Manual page 253

U l t i m a S V
Fixed Shaft
Horizontal Position
and Vertical Angle Adj. Handle
The slide chute angle and adjustments will vary with bag size. The
chute may be adjusted as needed by using the appropriate locking han-
dle. Turn the handles counterclockwise to loosen, and turn the handle
clockwise to tighten.
• The tilt angle adjustment allows the plate to tilt forward and
backward.
• The vertical position and horizontal angle adjustment
allows the plate to be raised or lowered on the fixed shaft
and tilted left to right.
• The horizontal position and vertical angle adjustment
allows the plate to move in and out on the short shaft and
rotate to the left or right.
H A Y S S E NSA N D I AC R E
Chute Tilt Angle
Adj. Handle
Vertical Position
& Horizontal
Angle Adj. Handle
Figure 10: Slide Chute
®
14
1 4 - 1 3 / R e v 1 5