Delta ASD-A2-0121 Series User Manual page 673

ASDA-A2
ECMA Series
Brake pull-in time
[ms (Max)]
Vibration grade (μm)
Operating temperature (°C)
Storage temperature (°C)
Operating humidity
Storage humidity
Vibration capacity
IP Rating
Approvals
Note:
*1 The rated torque is the continuous permissible torque between 0 to 40˚C (32°F to 104°F) operating
temperature which is suitable for the following heat sink dimension.
ECMA-__04 / 06 / 08 : 250 mm x 250 mm x 6 mm
ECMA-__10 : 300 mm x 300 mm x 12 mm
ECMA-__13 : 400 mm x 400 mm x 20 mm
ECMA-__18 : 550 mm x 550 mm x 30 mm
ECMA-__22 : 650 mm x 650 mm x 35 mm
Material: Aluminum – F40, F60, F80, F100, F130, F180, F220
*2 The built-in brake of the servo motor is for remaining the item in stop status. Do not use it to decelerate or
as the dynamic brake.
3 If desiring to reach the max. torque limit of motor 250%, it is suggested to use the servo drive with higher
watt.
11-14
F△13
05 08 13
70 70 70
IP65 (use the waterproof connector and shaft seal installation (or oil seal) model)
F△18
18 30 45
70 70 70
15
0°C to 40°C (32°F to 104°F)
-10°C to 80°C (14°F to 176°F)
20% to 90% RH (non-condensing)
20% to 90% RH (non-condensing)
2.5 G
Chapter 11 Specifications
F122
55 75 1B
70 70 70
1F
70