Delta ASD-A2-0121 Series User Manual page 333

Chapter 8 Parameters
Default： 0x0
Control
Mode：
Range： -
Data Size： 32-bit
Format： Decimal
Settings：While the Bit 1 of P2-70 is set to 1 to read the pulse number, this
P0-53 ZDRT
Operational
Interface：
Default： 0x0000
Control
Mode：
Range： 0x0000 ~ 0x000F
Data Size： 16-bit
Format： Hexadecimal
Settings：
8-34
ALL
Unit： Pulse or PUU
parameter represents the pulse number of encoder absolute position.
While the Bit 1 of P2-70 is set to 0 to read the PUU number, this
parameter represents the PUU number of motor absolute position.
Display range for number of revolution:
0 ~1280000-1 (Pulse); -2147483648 to +2147483647 (PUU)
General Range Compare Digital Output –
Filtering Time
Panel / Software
ALL
Unit： ms
X: Filtering time for 1
UYZ: Reserved
While the value of the monitoring variable is changed within the range
between the setting values of P0-54 and P0-55, this parameter is used
to set the filter timing for the monitoring variable. The value of
monitoring variable will output after the filtering time determined by
parameter P0-53.
Communication
monitoring variable
st
ASDA-A2
Address: 006AH
006BH
Related Section: N/A