Delta ASD-A2-0121 Series User Manual page 370

ASDA-A2
P1-46▲ GR3
Operational
Interface：
Default： 2500
Control
Mode：
Range： 20 ~ 320000
Data Size： 32-bit
Format： Decimal
Settings： The number of single-phase pulse output per revolution.
P1-47 SPOK Speed Reached (DO：SP_OK) Range
Operational
Interface：
Default： 10
Control
Mode：
Range： 0 ~ 300
Data Size： 16-bit
Format： Decimal
Settings： When the deviation between speed command and motor feedback
Pulse Number of Encoder Output
Panel / Software
ALL
Unit： Pulse
Setting range: 20 – 320000
The maximum output frequency of the hardware is 19.8 MHz.
Note: The following circumstances might exceed the max. allowable input
pulse frequency and occurs AL018:
1. Abnormal encoder
2. The motor speed is faster than the setting of P1-76.
Motor Speed
3.
60
Panel / Software
S / Sz
Unit： rpm
speed is smaller than this parameter, then the digital output
DO.SP_OK (DO code is 0x19) is ON.
Communication
P 1 46 4 19.8
   
Communication
Chapter 8 Parameters
Address: 015CH
015DH
Related Section: -
10 6

Address: 015EH
015FH
Related Section: -
8-71