ASDA-A2
P4-12
SOF2
Operational
Interface:
Default: Factory default
Control
Mode:
Range: 0 ~ 32767
Data Size: 16-bit
Format: Decimal
Settings: Manually calibrate the hardware offset. The calibration function needs
P4-13
TOF1
Operational
Interface:
Default: Factory default
Control
Mode:
Range: 0 ~ 32767
Data Size: 16-bit
Format: Decimal
Settings: Manually calibrate the hardware offset. The calibration function needs
Analog Speed Input Offset Adjustment 2
Panel / Software
ALL
Unit: -
to be enabled by P2-08. It is not suggested to adjust the auxiliary
calibration function. This parameter cannot be reset.
Analog Torque Input Offset Adjustment 1
Panel / Software
ALL
Unit: -
to be enabled by P2-08. It is not suggested to adjust the auxiliary
calibration function. This parameter cannot be reset.
Communication
Communication
Chapter 8 Parameters
Address: 0418H
0419H
Related Section: -
Address: 041AH
041BH
Related Section: -
8-153