Delta ASD-A2-0121 Series User Manual page 180

ASDA-A2
please set this DI as normally open (function code: 0x0123).
6) When the screen displays:
Warning of overcurrent:
Corrective Action:
Check the connection between the motor and servo drive.

Check if the conducting wire is short-circuited. Exclude short circuit and avoid metal

conductors being exposed.
7) When the screen displays:
Warning of undervoltage:
Corrective action:
Check if the wiring of main circuit input voltage is correct.

Use the voltmeter to measure if the main circuit voltage is normal.

Use the voltmeter to measure if the power system complies with the specification.

Note: During the process of power on or servo on, if an alarm occurs or shows any abnormal
display, please contact the distributors.
Chapter 5 Trial operation and Tuning
5-5