Delta ASD-A2-0121 Series User Manual page 454

ASDA-A2
P4-16 COF2
Operational
Interface：
Default： Factory default
Control
Mode：
Range： 0 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： Manually calibrate the hardware offset. The calibration function needs
P4-17 COF3
Operational
Interface：
Default： Factory default
Control
Mode：
Range： 0 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： Manually calibrate the hardware offset. The calibration function needs
Current Detector (V2 Phase) Offset
Adjustment
Panel / Software
ALL
Unit： -
to be enabled by P2-08. It is not suggested to adjust the auxiliary
calibration function. This parameter cannot be reset.
Current Detector (W1 Phase) Offset
Adjustment
Panel / Software
ALL
Unit： -
to be enabled by P2-08. It is not suggested to adjust the auxiliary
calibration function. This parameter cannot be reset.
Communication
Communication
Chapter 8 Parameters
Address: 0420H
0421H
Related Section: -
Address: 0422H
0423H
Related Section: -
8-155