Delta ASD-A2-0121 Series User Manual page 354

ASDA-A2
CPMK CAPTURE – Masking Range Setting
P1-20
Operational
Interface：
Default： 0
Control
Mode：
Range： 0 ~ +100000000
Size：
Format： Decimal
Settings：When multiple points are required to be captured, after each point is
Y: Reserved
Z: Bit settings of Compare additional function settings:
Bit
Function
Explanation
U: Reserved
Panel / Software
ALL
Unit： The Pulse Unit of Capture Axis
Data
32-bit
captured, the masking range can be set in this parameter. In the
masking area, the CAPTURE function will not work. The masking range
is defined as follows:
(CAP_DATA-P1-20，CAP_DATA+P1-20)
Note:
When the setting value of this parameter is set to 0, the masking
function is disabled.
version V1.038 sub19 and later models only)
3 2 1
- - - Automatically set P1-24 to 0.
When Bit0 is set to 1, P1-24 will only be
effective once and reset to 0 automatically.
Otherwise, the value of P1-24 will remain
- - -
unchanged.
(This function is available in firmware
version V1.038 sub19 and later models only)
Communication
Chapter 8 Parameters
0
Address: 0128H
0129H
Related Section: N/A
8-55