Delta ASD-A2-0121 Series User Manual page 450

ASDA-A2
PKEY Input Status of the Drive Keypad (Read-only)
P4-08★
Operational
Interface：
Default： -
Control
Mode：
Range： (read-only)
Data Size： 16-bit
Format： Hexadecimal
Settings： The aim is to check if the five keys, MODE, UP, DOWN, SHIFT, and
MOT
P4-09★
Operational
Interface：
Default： -
Control
Mode：
Range： 0x0000 ~ 0x001F
Data Size： 16-bit
Format： Hexadecimal
Settings：
P4-10■ CEN
Operational
Interface：
Default： 0
Control
Mode：
Panel / Software
ALL
Unit： -
SET, can work normally. This parameter is also used to check if the
Keys are all functional when producing servo drives.
Digital Output Status (Read-only)
Panel / Software
ALL
Unit： -
Note: There is no difference when you read the status through the panel or
communication.
Adjustment Selection
Panel / Software
ALL
Unit： -
Communication
Communication
Communication
Chapter 8 Parameters
Address: 0410H
0411H
Related Section: -
Address: 0412H
0413H
Related Section:
4.4.5
Address: 0414H
0415H
Related Section: -
8-151