Delta ASD-A2-0121 Series User Manual page 453

Chapter 8 Parameters
P4-14 TOF2
Operational
Interface：
Default： Factory default
Control
Mode：
Range： 0 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： Manually calibrate the hardware offset. The calibration function needs
P4-15 COF1
Operational
Interface：
Default： Factory default
Control
Mode：
Range： 0 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： Manually calibrate the hardware offset. The calibration function needs
8-154
Analog Torque Input Offset Adjustment 2
Panel / Software
ALL
Unit： -
to be enabled by P2-08. It is not suggested to adjust the auxiliary
calibration function. This parameter cannot be reset.
Current Detector (V1 Phase) Offset
Adjustment
Panel / Software
ALL
Unit： -
to be enabled by P2-08. It is not suggested to adjust the auxiliary
calibration function. This parameter cannot be reset.
Communication
Communication
ASDA-A2
Address: 041CH
041DH
Related Section: -
Address: 041EH
041FH
Related Section: -