Delta ASD-A2-0121 Series User Manual page 427

Chapter 8 Parameters
Format： Hexadecimal
Settings： Format: U Z Y X
Note: This parameter is effective only after you cycle power to the servo drive. You
P2-70 MRS
Operational
Interface：
Default： 0x0000
Control
Mode：
Range： 0x0000 ~ 0x0007
Data Size： 16-bit
Format： Hexadecimal
Settings：
8-128
X: Setup the operation mode
0: Incremental mode. Servo motor with absolute encoder can be
operated as incremental motor.
1: Absolute mode. (This setting is only available for the servo motor
with absolute encoder. When an incremental servo motor is
connected, AL069 will occur.)
Y: Setup the pulse command when absolute position is lost
0: When AL060 or AL06A occurs, it cannot accept pulse command
1: When AL060 or AL06A occurs, it can accept pulse command
Z: Function setting when index coordinates overflow
0: Index coordinates is lost when overflows
1: Index coordinates will not overflow, but absolute coordinates
(Fb_PUU)will not remain
U: Reserved
can establish the absolute origin coordinates after completing setting this
parameter.
Read Data Format Selection
Panel / Software
ALL
Unit： -
Bit7 Bit6
Bit15 Bit14
Bit 0: Data unit setting of digital input/output (DI/DO); 1: Pulse, 0: PUU
Bit 1: Communication data unit setting; 1: Pulse, 0: PUU
Bit 2: Overflow warning; 1: No overflow warning,
Communication
Bit5 Bit4 Bit3
Bit13 Bit12 Bit11
0: Overflow warning, AL289 (PUU),
ASDA-A2
Address: 028CH
028DH
Related Section: N/A
Bit2 Bit1 Bit0
Bit10 Bit9 Bit8
AL062 (number of turns).