Delta ASD-A2-0121 Series User Manual page 501

Chapter 8 Parameters
Range： 5 ~ 720, must < = (P5-10－P5-81)
Data Size： 16-bit
Format： Decimal
Settings： It means the E-Cam curve is divided into N area, and the table should
P5-83 ECMM E-CAM: Master Gear Ratio Setting M
Operational
Interface：
Default： 1
Control
Mode：
Range： 1 ~ 32767
Data Size： 16-bit
Format： Decimal
Settings： When receiving pulse number P of the Master, E-Cam will rotate M
P5-84 ECMP E-CAM: Master Gear Ratio Setting P
Operational
Interface：
Default： 3600
Control
Mode：
8-202
Unit： -
And P5-82 x P5-84 ＜＝ 2147483647
include N+1 data.
Note: 1. This parameter can be wrote when E-Cam stops (Please refer
toP5-88, X=0).
2. A2-L does not support E-Cam function.
Panel / Software
PR
Unit： -
circle, which means the M cycle of the E-Cam table.
Note: 1. This parameter can be wrote when E-Cam stops (Please refer
toP5-88, X=0).
2. A2-L does not support E-Cam function.
Panel / Software
PR
Unit： -
Communication
Communication
ASDA-A2
Address: 05A6H
05A7H
Related Section:
7.11
Address: 05A8H
05A9H
Related Section:
7.11