Delta ASD-A2-0121 Series User Manual page 498

ASDA-A2
P5-77■ CSAX
Operational
Interface：
Default： 0
Control
Mode：
Range： -2147483648 ~ +2147483647
Data Size： 32-bit
Format： Decimal
Settings： The position of this axis will synchronize with CAP signal. That is to
P5-78 CSDS
Operational
Interface：
Default： 100
Control
Mode：
Range： 10 ~ +100000000
Data Size： 32-bit
Format： Decimal
Settings： It is the moving distance of synchronous capture axis between two
The Position of Synchronous Capture Axis
(CAP SYNC AXES)
Panel / Software
ALL
Unit： -
say, when activating CAP every two times, the motor moving distance
of this axis is the value of P5-78. (There is no accumulative error and
only in single-way operation) The synchronous capture axis can be the
source of Master.
Note: A2-L does not support E-Cam function.
The Interval Pulse Number between Each
Synchronous Capture Axis
Panel / Software
ALL
Unit： Pulse
CAP actions.
The new value can be written into the parameter not until CAP is
disabled (P5-39, X0=0).
Note: A2-L does not support E-Cam function.
Communication
Communication
Chapter 8 Parameters
Address: 059AH
059BH
Related Section: -
Address: 059CH
059DH
Related Section: -
8-199