Delta ASD-A2-0121 Series User Manual page 401

Chapter 8 Parameters
P2-23 NCF1
Operational
Interface：
Default： 1000
Control
Mode：
Range： 50 ~ 1000
Data Size： 16-bit
Format： Decimal
Settings： The first setting value of resonance frequency. If P2-24 is set to 0, this
P2-24 DPH1
Operational
Interface：
Default： 0
Control
Mode：
Range： 0 ~ 32 (0: disable the function of Notch filter)
Data Size： 16-bit
Format： Decimal
Settings： The first resonance suppression (notch filter) attenuation rate. When
Note: If the value of attenuation rate is set to 5, then, it would be -5 dB.
P2-25 NLP
Operational
Interface：
Default： 0.2 (under 1 kW) or
Control
Mode：
8-102
Resonance Suppression (Notch filter) (1)
Panel / Software
ALL
Unit： Hz
function is disabled. P2-43 and P2-44 are the second Notch filter.
Resonance Suppression (Notch filter)
Attenuation Rate (1)
Panel / Software
ALL
Unit： -dB
this parameter is set to 0, the function of Notch filter is disabled.
Low-pass Filter of Resonance Suppression
Panel / Software
0.5 (other models)
ALL
Communication
Communication
Communication
2 (under 1 kW) or
5 (other models)
ASDA-A2
Address: 022EH
022FH
Related Section:
6.3.7
Address: 0230H
0231H
Related Section:
6.3.7
Address: 0232H
0233H
Related Section:
6.3.7