Service cases - software
3.7 Enter the final end user data (EUNA)
3.7.2
This is how you make a new entry in the logbook
Generating a new logbook entry
In order to log service and diagnostic procedures at the machine, make an entry in the
machine logbook. The activities performed are logged here after each service call.
To make a logbook entry, proceed as follows:
1. Select the "Diagnostics" operating area.
2. Press the "Version" softkey.
3. Press the "Logbook" softkey.
62
Hardware and Software
Service Manual, 03/2010, 6FC5397-5DP20-0BA0