Specific Safety Information For Simotion D4X5-2 - Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual

Safety instructions

1.2 Specific safety information for SIMOTION D4x5-2

1.2 Specific safety information for SIMOTION D4x5-2
Danger to life from hazardous voltage when connecting an unsuitable power supply
Only safety extra low voltage in accordance with EN/IEC 60950-1 may be connected at all
connectors and terminals.
Danger to life from electric shock due to insufficient safety isolation
Employing protection against direct contact using DVC A (PELV) is only permissible in areas
with equipotential bonding and in dry rooms indoors.
Use other protective measures against electric shock, such as touch protection, if the
specified conditions are not met.
Danger to life from unexpected movement of machines on automatic restart
An automatic restart can be programmed for SIMOTION controllers. When the power returns,
the axes start automatically.
Make sure this presents no hazard to personnel or property.
NOTICE
Damage to option boards caused by electric fields or electrostatic discharge
Option boards are ESD-sensitive components.
De-energize the SIMOTION D4x5‑2 device before inserting or removing the option board.
The SIMOTION D4x5‑2 is in a de-energized state when all the LEDs are off.
Comply with the ESD rules.
NOTICE
Damage to the CompactFlash card from electrical fields or electrostatic discharge
The CompactFlash card is an ESD-sensitive component.
De-energize the SIMOTION D4x5‑2 device before inserting or removing the CompactFlash
card. The SIMOTION D4x5‑2 is in a de-energized state when all the LEDs are off.
Comply with the ESD rules.
18
WARNING
WARNING
WARNING
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
SIMOTION D4x5-2