Tray 4 Open During Run Rap - Xerox WorkCentre 5687 Series Service Manual

Figure 2 Circuit diagram
Status Indicator RAPs
07-303, 07-304

07-304 Tray 4 Open During Run RAP

07-304 Tray 4 0pen during run when the paper is fed from tray 4.
Initial Actions
• Check for obstructions behind the tray.
• Ensure that the tray is pushed fully home.
• Check the switch actuator, Figure 1.
Procedure
Enter dC330 code 07-304 tray 4 home switch, S07-304. Press Start. Open and fully close the
tray. The display changes.
Y N
Go to Flag 1. Check S07-304. Refer to:
• GP 13 How to Check a Switch.
• P/J392, HCF control PWB.
• 01B 0V Distribution RAP.
Install new components as necessary:
• Tray 4 home switch, PL 7.20 Item 4.
• HCF control PWB, PL 7.20 Item 2.
Check the switch holder, PL 7.20 Item 3.
If the problem continues, install new components as necessary:
• Tray 4 home switch, PL 7.20 Item 4.
• HCF control PWB, PL 7.20 Item 2.
August 2007
2-152 WorkCentre 5687 Family