Installation Of Signal Lamp, Upper Arm (Option) - ABB IRB 760 Series Product Manual

2 Installation and commissioning

2.3.9 Installation of signal lamp, upper arm (option)

2.3.9 Installation of signal lamp, upper arm (option)
General
As an option, a signal lamp can be installed on the robot. The lamp is activated
when the controller is in the MOTORS ON state.
Location of signal lamp, upper arm
The signal lamp is located on the tilthouse unit, as shown in figure.
xx1000001030
A
B
Required equipment
Equipment, etc.
Signal lamp kit
Gasket
Continues on next page
84
Signal lamp
Motor cover
Article number
Spare parts on
page
3HAC033206-001
© Copyright 2011-2018 ABB. All rights reserved.
Note
Complete kit with signal lamp,
393. cables, adapter, gasket, screws etc.
Fitted between motor and cable
gland, replace if damaged.
3HAC039838-001 Revision: M
Product manual - IRB 760