Dell C9000 Series Reference Manual page 84

do
Allow the execution of most EXEC-level commands from all CONFIGURATION levels without returning to the
EXEC level.
C9000 Series
Syntax
do command
Parameters
command
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Information The following commands are not supported by the do command:
Enter an EXEC-level command.
• CONFIGURATION
• INTERFACE
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
•
enable
•
disable
•
exit
•
config
Control and Monitoring 84