Show Cpu-Interface-Stats - Dell C9000 Series Reference Manual

show cpu-interface-stats

View CPU interface statistics.
C9000 Series
Syntax
show cpu-interface-stats [cp | rp | linecard {slot-id} |all]
Parameters
cp
rp
linecard slot-id
all
Defaults Display interface statistics from all switch CPUs.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.5.1.0
6.2.1.1
Enter the keyword cp to display the interface statistics only from
the Control Processor.
Enter the keyword rp to display the interface statistics only from
the Route Processor.
Enter the linecard slot-id parameters to display the
interface statistics only from a specified line card. The range of
line-card slot IDs is from 0 to 11.
Enter the keyword all to display the interface statistics from all
switch CPUs, including the Control Processor, Route Processor,
and line cards.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series
Introduced on the E-Series.
Control and Monitoring 126