Clear Ip Bgp * (Asterisk) - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

ipv6-address

flap-statistics

EXEC Privilege

clear ip bgp * (asterisk)

Reset all BGP sessions in the specified category. The soft parameter (BGP Soft Reconfiguration) clears the

policies without resetting the TCP connection.

clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast

soft [in | out] | soft [in | out]]

Border Gateway Protocol

Enter an IPv6 address to reset neighbors belonging to that IP.

Used without a qualifier, the keyword resets all neighbors

belonging to that IP.

(OPTIONAL) Enter the keywords flap-statistics to clear

all flap statistics belonging to that AS or a specified address

family within that IP.

(OPTIONAL) Enter the keyword ipv4 to select options for

that address family.

(OPTIONAL) Enter the keyword ipv6 to select options for

that address family.

(OPTIONAL) Enter the keyword unicast to select the

unicast option within the selected address family.

(OPTIONAL) Enter the keyword multicast to select the

multicast option within the selected address family. Multicast

is supported on IPv4 only

(OPTIONAL) Enter the keyword soft to configure and

activate policies without resetting the BGP TCP session, that

is, BGP Soft Reconfiguration.

NOTE: If you enter clear ip bgp ip6-address

soft, both inbound and outbound policies are reset.

(OPTIONAL) Enter the keyword in to activate only inbound

(OPTIONAL) Enter the keyword out to activate only

outbound policies.

Introduced on the Z9500.

Introduced on the E-Series ExaScale.