Ip Http Source-Interface - Dell C9000 Series Reference Manual

Defaults No user name is configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Usage Information Configure a password with the ip ftp password command.
Related ip ftp password
Commands

ip http source-interface

Configure an interface's IP address as the source IP address for HTTP connections.
C9000 Series
Syntax
ip http source-interface interface
To delete an interface, use theno ip http source-interface interface
command.
Parameters
interface
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
— sets the password for FTP connections.
Enter the following keywords and slot/port or number
information:
• For Loopback interfaces, enter the keyword loopback
then a number from zero (0) to 16383.
Control and Monitoring 98