Show Asf - Dell C9000 Series Reference Manual

show asf

View statistics about the Alternate Store and Forward (ASF) packets that are transmitted on the switch line
cards.
C9000 Series
Syntax
show asf linecard slot-id
Parameters
linecard slot-id
Defaults all
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.5.1.0
6.2.1.1
Example
Dell#show asf linecard 0
Processor : CP
--------------
Received 100% traffic on TenGigabitEthernet 2/2 Total packets:100
LLC:0, SNAP:0, IP:100, ARP:0, other:0
Unicast:100, Multicast:0, Broadcast:0
Processor : RP1
---------------
Received 62% traffic on TenGigabitEthernet 2/2 Total packets:500
LLC:0, SNAP:0, IP:500, ARP:0, other:0
Unicast:500, Multicast:0, Broadcast:0
Received 37% traffic on TenGigabitEthernet 2/1 Total packets:300
Enter the slot ID of a line card. The range of slot IDs is from 0 to
2.
Description
Introduced on C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series
Introduced on the E-Series.
Control and Monitoring 119