Usage Information The host name is used in the command-line prompt.
To configure a desired PE console hostname, use the hostname command from a PE
console.
To unconfigure the hostname configured for the PE console, use no hostname. If no
hostnames are configured, the system. uses the default hostname, "Dell".
Example (PE
Dell#hostname PE1
Console)
PE1#
ip ftp password
Specify a password for outgoing FTP connections.
C9000 Series
Syntax
ip ftp password [encryption-type] password
To remove a password and return to the default setting, use the no ip ftp
password [password] command.
Parameters
encryption-type
password
Defaults
Not configured.
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
(OPTIONAL) Enter one of the following numbers:
•
0 (zero) for an unecrypted (clear text) password
•
7 (seven) for a hidden text password
Enter a string up to 40 characters as the password.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Control and Monitoring
95