Field
Incoming
interface
RPF neighbor
Outgoing
interface list:
Example
Dell#show ip pim snooping tib
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
Timers: Uptime/Expires
* : Inherited port
(*, 225.1.2.1), uptime 00:00:01, expires 00:02:59, RP
165.87.70.1, flags: J
Dell#show ip pim snooping tib vlan 2 225.1.2.1 165.87.1.7
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
Timers: Uptime/Expires
* : Inherited port
(165.87.1.7, 225.1.2.1), uptime 00:00:08, expires 00:02:52,
flags: j
show ip pim summary
View information about PIM-SM operation.
S4810
Syntax
show ip pim summary
Command
•
Modes
1304
Description
•
K=acknowledge pending state
Displays the reverse path forwarding (RPF) interface towards
the RP/ source.
Displays the next hop from this interface towards the RP/
source.
Lists the interfaces that meet one of the following criteria:
•
a directly connect member of the Group
•
statically configured member of the Group
•
received a (*,G) Join message
SGR-P - (S,G,R) Prune
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
GigabitEthernet 4/11 RPF 165.87.32.2 00:00:01/00:02:59
GigabitEthernet 4/13 Upstream Port
SGR-P - (S,G,R) Prune
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
GigabitEthernet 4/11 Upstream Port
GigabitEthernet 4/13 DR Port
GigabitEthernet 4/20 RPF 165.87.32.10 00:00:08/00:02:52
EXEC
-/-
-/-
-/-
PIM-Sparse Mode (PIM-SM)