Removing The Front Tray Cables - Xerox WorkCentre 5222 Service Manual

Figure 9 Releasing the Cable ends from the Lift Shaft
3.

Removing the Front Tray Cables.

(Figure
a. Remove (1) E-Ring, (1) Wire Guide, and (1) Pulley.
b. Disengage the Tray Cable from the Bottom Plate in 2 places and remove the Tray
Cable.
Repairs and Adjustments
REP 7.3.4
10, Figure 11)
1
Remove the E-Ring (1), Wire
guide (1), and Pulley (1)
2
Remove the Cables
Figure 10 Removing the front Tray Cables
February, 2008
4-44
Launch Version
WorkCentre 5225, 5230