Removing The Stacker Tray Assembly (J0Fa42250); Installing The Stacker Tray Assembly (J0Fa42251); Removing The Rear Bracket (J0Fa42252); Rep 22.8.2 Stacker Shaft Assembly - Xerox WorkCentre 5222 Service Manual

10. Remove the Stacker Tray Assembly.
(1)Remove Screws (5).
(2)Remove Stacker Tray Assembly.
Figure 4 Removing the Stacker Tray Assembly (j0fa42250)
Replacement
1. Reverse the removal procedure for replacement.
2. Install the Stacker Tray Assembly and A-Finisher as shown in the figure.
Figure 5 Installing the Stacker Tray Assembly (j0fa42251)
Launch Version
WorkCentre 5225, 5230
(Figure 4)
(Figure

REP 22.8.2 Stacker Shaft Assembly

Parts List on PL 22.8
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the A-Finisher from the machine.
2. Remove the Rear Cover.
3. Turn over the A-Finisher.
4. Remove the Tray Cover.
5. Remove the rear Bracket.
(1)Remove Screw.
(2)Remove Bracket.
5)
Figure 1 Removing the rear Bracket (j0fa42252)
February, 2008
4-199
WARNING
(REP 22.1)
(PL 22.1)
(PL 22.2)
(Figure 1)
Repairs and Adjustments
REP 22.8.1, REP 22.8.2