Rep 12.16 Stacker Shaft Assembly - Xerox VersaLink B7025 Service Manual

10. Remove the stacker tray assembly,
a. Remove five screws (1).
b. Remove the stacker tray assembly (2).
Figure 4 Stacker tray assembly removal
Replacement
1. The replacement is the reverse of the removal procedure.
2. Install the stacker tray assembly and integrated office finisher as shown in
Figure 5 Stacker tray assembly installation
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 4:
Figure

REP 12.16 Stacker Shaft Assembly

Parts List on PL 12.20
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the integrated office finisher,
2. Remove the rear cover,
3. Turn over the integrated office finisher.
4. Remove the tray cover,
5. Remove the rear bracket,
a. Remove the screw (1).
b. Remove the bracket (2).
5.
April 2017
4-75
WARNING
GP 10. Disconnect the power cord
REP 12.1.
PL 12.05 Item 14.
PL 12.06 Item 3.
Figure 1:
Figure 1 Rear bracket removal
Repairs and Adjustments
REP 12.15, REP 12.16