Enabling Software Features On Devices Using A Command Option - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

does not paginate the display output

copies the output to a file for future use

Displaying All Output

To display the output all at once (not one screen at a time), use the no-more option after the pipe. This

operation is similar to the terminal length screen-length command except that the no-more

option affects the output of just the specified command. For example: Dell#show running-config|

Filtering the Command Output Multiple Times

You can filter a single command output multiple times. To filter a command output multiple times, place

the save option as the last filter. For example: Dell# command | grep regular-expression |

except regular-expression | grep other-regular-expression | find regular-

expression | no-more | save.

Enabling Software Features on Devices Using a Command

This capability to activate software applications or components on a device using a command is

supported on the S4810, S4820T, and S6000, platforms.

Starting with Release 9.4(0.0), you can enable or disable specific software functionalities or applications

that need to run on a device by using a command attribute in the CLI interface. This capability enables

effective, streamlined management and administration of applications and utilities that run on a device.

You can employ this capability to perform an on-demand activation or turn-off of a software component

or protocol. A feature configuration file that is generated for each image contains feature names denotes

whether this enabling or disabling method is available for such features. In 9.4(0.0), you can enable or

disable the VRF application globally across the system by using this capability.

You can activate VRF application on a device by using the feature vrf command in CONFIGURATION

NOTE: The no feature vrf command is not supported on any of the platforms.

To enable the VRF feature and cause all VRF-related commands to be available or viewable in the CLI

interface, use the following command. You must enable the VRF feature before you can configure its

related attributes.

Dell(conf)# feature vrf

does not return the previous search result because it only

searches for instances containing a noncapitalized "ethernet"

returns instances containing both "Ethernet" and "ethernet"