Table of Contents
Advertisement
show dhcp lease
Use the show dhcp lease command to display IPv4 addresses leased from a
DHCP server.
Syntax
show dhcp lease [interface {out-of-band | vlan vlan-id}]
•
out-of-band—The out-of-band interface.
•
vlan-id—The VLAN identifier.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
This command lists all IPv4 addresses currently leased from a DHCP server
on an IP interface. This command only applies to IP interfaces. To see the
IPv4 address leased on the out-of-band interface, use the command
Maximum Next Hops.............................. 16
This command output provides the following information.
Term
IP address, Subnet
mask
DHCP Lease server The IPv4 address of the DHCP server that leased the address.
State
DHCP transaction
id
Lease
Renewal
Rebind
Description
The IP address and network mask leased from the DHCP server.
State of the DHCPv4 Client on this interface.
The transaction ID of the DHCPv4 Client.
The duration that the IP address was leased by the server.
The time when the next DHCP renew Request is scheduled to
renew the leased IP address.
The time when the DHCP Rebind process is scheduled.
out-of-band.
Switch Management Commands
1892
Advertisement
Table of Contents
