HP ProCurve 7102dl Reference Manual page 1253

SROS Command Line Interface Reference Guide
dns-server <address1> <address2>
Use the dns-server command to specify the DNS server address(es) to assign to a client. Use the no form
of this command to remove defined server address(es).
Syntax Description
<address1>
<address2>
Default Values
By default, no DNS server address is defined.
Usage Examples
The following example defines two DNS server addresses for this configuration pool:
ProCurve(config-ike-client-pool)#dns-server 172.16.17.1 172.16.17.3
5991-2114
Assigns the first DNS server address.
Optional. Assigns the second DNS server address.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
IKE Client Command Set
1251