HP ProCurve 7102dl Reference Manual page 1274

SROS Command Line Interface Reference Guide
deny<community-number> | internet | local-as | no-export |
no-advertise]
Use the deny command to add an entry to the community list that denies BGP routes containing the
specified community number in the community attribute. Use the no form of this command to remove the
statement from the community list.
Syntax Description
<community-number>
internet
local-as
no-export
no-advertise
Default Values
No default value necessary for this command.
Usage Examples
The following example creates a community list named MyList to deny BGP routes that have the Internet
community number in their community attribute:
ProCurve(config)#ip as-path-list MyList
ProCurve(config-comm-list)#deny internet
5991-2114
Denies routes that contain this value in their community attribute. This is a
numeric value that can be an integer from 1 to 4,294,967,295 or string in the
form "aa:nn", where the value of "aa" is the AS number and the value of "nn"
is the community number. Multiple community number parameters can be
present in the command.
Denies routes that contain the reserved community number for the
INTERNET community.
Denies routes that contain the reserved community number for
NO_EXPORT_SUBCONFED. Routes containing this attribute should not
be advertised to external BGP peers.
Denies routes that contain the reserved community number for
NO_EXPORT. Routes containing this attribute should not be advertised to
BGP peers outside a confederation boundary.
Denies routes that contain the reserved community number for
NO_ADVERTISE. Routes containing this attribute should not be advertised
to any BGP peer.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
AS Path List Command Set
1272